Automatic washing machines are assembled in such a way that they can be used for several years without breakdowns. Consumers who have managed to get used to such luxury act according to a certain pattern - pour in powder, put things in the drum, and activate the required washing mode. Rarely does anyone clean a washing machine from plaque and dirt, and soon an unpleasant odor begins to be felt, mold appears on the rubber seal, and streaks form in the drum. In such situations, Tiret cleaner for washing machines helps a lot. The product is universal and can be used to clean any washing equipment.
Using Tiret
One of the best tools for clearing blockages is Tiret Turbo. Numerous reviews say that using this product you can remove blockages of any complexity.
Its main advantage is that it does not contain substances harmful to the human body.
He copes with his task in literally a matter of minutes. There is no need to use force for this, so it is suitable for any housewife.
Its composition consists of very effective, but at the same time safe substances:
- Chlorine.
- Surfactant
The product contains active chlorine, which, when reacting with a blockage, releases foam and carbon dioxide.
At the same time, air bubbles appear from the drain, which destroy the plug in the pipe. Chlorine also kills fungi and infections in the plumbing system. Chlorine is a volatile compound, of which there will be no trace left in the room after two hours.
The surfactants that make up Tiret Turbo come into contact with fats and break them down into molecules, due to which the pipe is completely cleaned from the inside.
How to use this remedy? It's actually very simple. To remove the blockage you need to:
- Pour part of the Tiret Turbo bottle into the clogged drain and leave for a few minutes. If the clog is not too large, then five minutes is enough, but if you have time, it is better to let the product work for twenty minutes.
- After a while, you need to pour more than two liters of boiling water into the drain. The bigger, the better.
- Now you should wait a little while the boiling water flushes the system.
- If the water drains slowly, the cleaning procedure must be repeated.
Like any cleaning product, Tiret Turbo also has precautions for use. Despite the fact that its composition is declared as safe, you should not experiment with your body
Be sure to use rubber gloves.
It should be borne in mind that the chemical reaction can occur quite violently and splashes may fly from the sink. You should use goggles to protect your eyes. When cleaning the drain, do not lean close to the sink so as not to inhale chlorine fumes and prevent the product from getting into your eyes.
Under no circumstances should Tiret Turbo gel be combined with bleach, as the chemical reaction can be unpredictable. Toxic fumes can enter the body and cause harm to it. By the way, chlorine bleaches perfectly. He doesn't need helpers.
And needless to say, such a product should be stored away from small children.
It is always easier to do prevention than treatment. The situation is similar with blockages. To prevent blockages from occurring too often, you should follow some rules:
- There should be special mesh on the sink drain that will hold debris.
- Now it is possible to install a waste disposer in absolutely any sink.
- Use Tiret Turbo for prevention, periodically pouring it into the system.
https://youtube.com/watch?v=2r-ZG95sLzQ
Reviews
Tiret has been on the market for quite a long time, so many people have used it. Reviews are mostly positive.
Reviews of Tiret Turbo, a remedy for pipe blockages, are only positive. But we must not forget that if you want to get a good result and not harm your health, then be sure to follow the instructions for this gel.
- Valentina :
“I buy Tiret all the time and use it for preventive purposes. I pour it into the sinks in the bathroom and kitchen once a month according to the instructions. There have been no blockages for several years, all thanks to Tiret.” - Marina :
“A blockage appeared in the kitchen the day before yesterday; water began to slowly drain. The plunger didn’t help, so I had to buy Tiret on the advice of a neighbor. He was pleasantly pleased with the price. I left the gel in the sink for 15 minutes, but it didn’t help at all. After refilling, the blockage cleared. There was a smell of chlorine in the kitchen, which quickly disappeared after airing. I recommend this product to everyone." - Natalya :
“The drain hole in the shower stall recently became clogged. The water stays at the same level and flows away very slowly. I had to call a plumber, who promised to come only in the evening. I decided to go to the store, where the saleswoman recommended Tiret to me. I did everything as it was written in the instructions, the water went away literally immediately. I really liked the product, despite the affordable price, the effectiveness is high.”
How else can you clear the blockage?
Instructions for use Almag-01
If you do not have the opportunity to quickly run to the store or you are not a supporter of chemicals, or maybe for other reasons you do not want to resort to the help of “Mole”, “Tiret” or another product, try mechanically cleaning the pipes or using folk recipes.
The simplest method at first glance is using a plunger. It is a cup-shaped rubber nozzle on a wooden or plastic handle and serves to release air from the pipeline, which pushes contamination through the pipe and eliminates it. But a plunger is not always able to get rid of dirt, since air cannot push through severe blockages.
If you call a plumber, he will not pour special products into the pipes, but will either blow out the pipe, or disassemble it and clean it with a hose or hook, pulling out contaminants. Blowing is carried out with special equipment similar to a vacuum cleaner. If you can disassemble the pipe and clean it yourself (if you, of course, are sure that you will reassemble it correctly later), then you cannot blow it out yourself using any means, since you can damage the pipes not only in the apartment, but also in the general building. It is better to pay for the services of a plumber than to pay for repairs.
Instructions for use
An important condition for using the gel is the presence of a small amount of water. The product shows effectiveness in breaking down blockages of organic origin and fat deposits. Tiret is also recommended for prophylactic purposes.
The substance is considered quite toxic, so precautions should be taken in advance. It is recommended to carry out the procedure in a ventilated area
Tiret Turbo can be used for preventive purposes.
Instructions for use:
Remove any remaining water from the sink and use a mug to scoop it out if necessary. This will help maintain the concentration of the solution and increase cleaning efficiency. Pour ¼ bottle into the drain hole and leave for 5-15 minutes. depending on the complexity of the blockage. It is recommended to pour the liquid into the center of the hole; the solution will reach the blockage faster. Without turning on the water, pour ½ of the product remaining in the bottle, wait 5-15 minutes. After this, bubbling sounds may be heard. It is not recommended to look into the drain hole; this will help to avoid the harmful effects of vapors on the body. Fill a sink full of hot water, after closing the drain with a stopper. Open the plug and let water through. Under pressure, the clog will go away faster. Boiling water will help increase the effectiveness of the procedure
When using it, care must be taken when removing the plug.
The procedure for clearing the blockage can be repeated several times if necessary; it is very important to follow safety precautions. Don't forget to use protective equipment. It is best to wear special gloves and a mask
It is best to wear special gloves and a mask
Don't forget to use protective equipment. It is best to wear special gloves and a mask.
In accordance with the instructions for using tiret for washing machines, the product must be used 2 times a year on an empty cycle. To clean the machine, the solution must be poured in a small amount into the compartments for powder and rinse aid, and the rest of the contents of the container must be poured into the empty laundry compartment. After this, the machine should be turned on at 60 degrees and a full wash cycle should be carried out.
Before using Tiret Cleaner for washing machines, carefully read the instructions.
Advantages and disadvantages
Main advantages of the product:
- safety for plastic and metal pipes;
- economical consumption - 1 liter of content is enough to clear 2-3 blockages;
- speed of action - the cork dissolves in 5-20 minutes;
- ease of use - convenient bottle shape, dispenser.
Flaws:
- the inability to use gel to remove blockages in the toilet;
- pungent chemical smell;
- toxicity - use of the product is accompanied by the release of harmful chlorine vapors.
This product is not suitable for removing clogs in the toilet.
The instructions indicate that the product should be left for 5 minutes. This time is not enough; sometimes the blockage can be removed only after an hour and a half of exposure.
How often should an automatic machine be cleaned?
Kip for children: instructions for use
There is no need to use Tiret weekly; the effect after its use will last for a longer period. The optimal solution is to perform such a procedure once every six months, which is confirmed by numerous reviews from the owners of household machines. By the way, the powder can be used more often - the frequency of its use depends on the degree of contamination of the machine.
Periodic cleaning of automatic machines helps extend their service life and prevents the formation of fungal mold and dirt deposits on the internal elements of the equipment. A device for washing clothes is characterized by its ability to gradually accumulate small debris, residues of washing powder, and impurities contained in the water supply system. Using Tiret powder, scale is removed from the water heater, the powder and conditioner remaining in the tray are removed, the internal walls of the hoses are washed, dirt is washed out from the walls of the drum, and the rubber seal is cleaned.
Types of contamination of washing equipment
Let's figure out what problems occur in the washing machine:
- Scale gradually appearing on the water heating element complicates heating of the liquid, reducing the efficiency of washing. Its layer of scale prolongs the heating process, which affects the consumption of electrical energy. If you do not clean the heating element in a timely manner, it becomes covered with a thick layer of scale, causing serious malfunctions in the machine mechanism;
- dirt, hair and dust that end up in the drum along with things are poorly washed out, settling inside the hoses and on parts. If such contamination is not removed in a timely manner, a characteristic odor will appear from the drum;
- Fungal mold also forms in the car. Once it enters the human body through things, it contributes to the appearance of allergies.
Types of products used for plastic pipes
Instructions for using citric acid to clean a washing machine
Manufacturers of household chemicals produce three forms of preparations for cleaning sewer pipes:
- liquid;
- gel;
- solid (powder and granular).
All of them have a similar effect, differing in the degree of concentration of active substances and the options for their combinations in the composition.
Liquid products were created first, have been used for a long time and are known to many. They are considered less effective compared to more modern products and are consumed in large quantities, which indicates that this method is uneconomical. Contain aggressive reagents that damage plastic sewer structures.
Gels are much more effective than liquid products. They are heavier than water and have the ability to penetrate deeply, to the point of congestion. They dissolve products of organic origin and cover the inner surface of the pipe with a thin layer, preventing the rapid appearance of a new blockage. They act gently on plastic without damaging drainage systems.
Modern granular solvents have the best effect. The instant action of these products is due to the presence of active breaking down components in the granules. The dry mixture is easily poured directly into the drain hole and filled with a small amount of water. The reagents released as a result of the reaction dissolve dirt and grease as quickly as possible (20-25 minutes is enough). The advantages of granular mixtures are cost-effectiveness, guarantee of pipe integrity, disposable packaging, affordable price.
Powder products meet all the characteristics of granular preparations: quick effect, economical consumption, reasonable price. Disadvantage - fine powder in the form of dust can get into the respiratory tract, onto the skin, mucous membranes, causing allergic reactions and even chemical burns.
Drainage systems of private households require special attention. Sewage is discharged into special septic tanks, where it is processed by colonies of bacteria. The use of aggressive household chemicals creates conditions unsuitable for the normal functioning of microorganisms. To restore high-quality sewage processing, colonies of viable bacteria have to be revived again.
In order not to harm the septic tank ecosystem, experts advise pouring a preparation for cesspools into the pipeline. Microorganisms will process the garbage plug within a day without damaging the drainage structure.
Methods for clearing blockages
You can remove the blockage in 2 ways:
- mechanical;
- chemical
Mechanical
Clearing clogs is done using a plunger or a plumbing cable. The plunger is effective for simple sewer contamination. If it turns out to be ineffective, use a cable with a diameter of about 8 mm. First, the siphon is disassembled, then a metal cable is inserted into the hole until it hits the dirt plug and carefully scrolls clockwise. Then you need to pour a large amount of boiling water into the pipe to clear the blockage.
Chemical
Cleaning is carried out using household chemicals, which can be purchased at any hardware store. The products come in the form of powder, granules or liquid. According to the active composition - acidic and alkaline. Their choice is determined by the degree of blockage and the material of the pipes.
Chemical compositions are:
- liquid;
- powder;
- acidic;
- alkaline.
The choice of one or another product is determined by the characteristics of the material from which the pipes are made, as well as the type of blockage. More often they use universal compounds that can cope with any blockage.
Ways to deal with blockages
No matter how carefully a person uses the plumbing, hair, dirt and grease will still end up in the sink and bathtub flush. After a while, all these residues form a lump, which clogs the pipes.
The very first method that everyone uses to clear a blockage is to use a plunger. The suction cup creates a vacuum that helps push out the clog. This method does not require weak physical training and is not always effective. The clog plug may only be partially removed and water will flow through it, but not as it should. After some time, the situation will repeat itself, because that part of the blockage will be replaced by another part, which is formed as a result of the use of plumbing.
As a rule, many people already resort to the help of specialists and a plumber solves this problem. He removes the plug with a special metal cable, which is inserted into the pipe. As a result, mechanical removal of the blockage occurs.
But, unfortunately, it is not always convenient to call a plumber, since you can wait a long time for him, and the blockage needs to be removed right away. And after his visit, the room will have to be thoroughly cleaned.
Folk remedies such as baking soda are completely ineffective because they cannot penetrate deeply. There are a great variety of special products on sale designed to clean drains. They are:
- gel;
- liquid;
- powdery.
But it is worth considering that, as a rule, such products are unsafe, since they contain chemical elements harmful to humans.
The components of such products react with the blockage and dissolve it. But at the same time, substances released into the air can settle on the human respiratory system, as well as on surrounding objects, causing severe allergic reactions. This is especially true for children, so you need to be extremely careful when choosing a product.
When purchasing, you need to carefully study the composition, since some elements can even dissolve plastic, which is unacceptable when clearing blockages in plastic pipes.
Analogs
When clearing complex blockages, other means are also used. They provide effective removal of grease, food waste, hair, fur, and limescale. When using all products, precautions must be observed. The following products are highly effective in removing blockages: Mole, Deboucher, Floop, Mister Muscle.
Operating principle
The main plug is fatty deposits, the viscous structure of which forms a barrier to the free flow of water through the pipes. It has adhesive properties; various substances and particles stick to it. The base is reinforced with mechanical impurities in the form of solid particles of earth, dust, wool, hair.
The basis of the cork is fatty deposits.
The gel penetrates into all places, splitting the cork. Within 5 minutes, the components react with the elements of the product, after which the procedure is repeated if necessary.
The gel breaks up the cork well. If necessary, you can repeat the procedure.
The effectiveness of the gel is achieved due to its composition. Its components are safe for the health of people and animals. There is no need to use physical force; any housewife can handle Tiret. The main active ingredient of the product is active chlorine. When it comes into contact with sewer sludge, carbon dioxide is released. Air bubbles emerge from the drain and take an active part in the destruction of debris.
With the help of Tiret Turbo, any housewife can deal with the blockage herself without outside help.
Chlorine has strong antiseptic properties. After it penetrates the sewer system, the inner surface of the pipeline is disinfected. The process is accompanied by the destruction of mold and infections. Chlorine is volatile; after 2 hours the substance evaporates completely.
Surfactants (surfactants) react with fats, which are broken down and freely removed from the sewer pipes.
The chlorine contained in the product disinfects surfaces.
Features and composition
Due to its dense consistency, the gel does not mix with water immediately. The high concentration of tiret turbo allows the product to be used to remove blockages over long distances.
Compound:
- Chlorine is a substance that interacts with all elements. It penetrates microorganisms (bacteria, fungi), comes into contact with atomic oxygen, after which the contaminant cells are destroyed.
- Surfactants (surfactants) are divided into anionic and nonionic. The first ones have a negative charge on the heads and are considered the most common. The reaction is accompanied by the splitting of dense masses into small particles that mix with dissimilar substances. Nonionic are substances with a double charge that function together with anionic analogues. Their addition helps stabilize the foam and compact the structure.
Some of the main components in Tiret Turbo are chlorine and surfactants.
The complex composition is used to remove dense blockages in the kitchen and bathroom. The thick viscous form provides retention in difficult to pass places; the components react with many organic substances. Chlorine has a suppressive effect on mold, living bacteria, and volatile substances that produce odors.
Gel Tiret Turbo Professional for clearing blockages
We can assume that you are familiar with the commercial pipe cleaning products: Instant Power concentrate, Mole, Eco-drain for blockages 100 g, Atmosbio for pipe cleaning 1 l (Makzim), bacterial pipe cleaner Robik K-67, available on the market today. However, it is difficult to call them safe, since most anti-clog remedies are based on harsh chemicals, which, among other things, are not always effective. Chemicals also form harmful fumes, which settle as a toxic layer in the bathroom and kitchen after use, which is fraught with negative consequences for the health of people living in the apartment/house. In such a situation, it is better to trust other means that promise results without consequences. Tiret Professional gel (Tiret) Professional has been and remains a very effective means of combating blockages.
If you check, you will find many chemical products on sale to clear drain clogs. However, Tiret Turbo gel remains the most effective remedy for drain blockages for many homeowners. Why? For the simple reason that rubs promote disinfection along with the removal of dirt, grease, oil, wax and mold. Another positive effect is water softening. All that remains is to remove the blockage. Let's look at the use of tiret turbo using the example of clearing a clog in the sink.
Unclogging a double sink drain
First of all, you need to take care of your protection. You will need a pair of rubber gloves to protect your hands, as well as glasses to protect your eyes from contact with the baking soda/gel. The reaction to contact can be quite violent, so protective equipment is mandatory. Show timely concern.
Now that you have everything ready, take a measured dose of Tiret Professional gel (Tiret) Professional and pour it into the drain. Wait a while for the rubbing gel to react with the clogged pipe.
Next, take half the dose of tiret and pour it down the drain. Again, leave the clog alone for half an hour. The reaction of the gel with the clog produces carbon dioxide, which appears as bubbles and eats away the debris and oils from the clog in the pipe.
Now comes the most crucial moment of the entire procedure. You will need to boil water, you need 5-6 glasses of boiling water, which are slowly poured into the sewer, so that the clog weakened by the chemical reaction is washed out of the pipe. Don't lean over the sink to watch the reaction. Stay away as boiling water can aggravate the cleaning reaction.
How to pour pipe cleaner down the drain
In general, this completes the cycle of the pipe cleaning process. Continue repeating the procedure if you are unable to remove the clog the first time. As a rule, 3-4 times is enough. Avoid using Tiret Professional with bleach as the two products combine to produce harmful chemical gases that should not be inhaled.
Remember, you can use this pipe cleaner when you have metal pipes in your home. Metal easily resists the reaction, which is not the case with plastic piping, which can melt as a result of this reaction. Products for plastic pipes are usually marked with the appropriate inscription on the label.
It is recommended to apply this solution on a weekly basis as part of the prevention of blockages. This is all we wanted to tell you about the use of Tiret Turbo Professional gel; we hope that this information has borne fruit in the fight against blockages.
Rules for using Tiret powder
Let's figure out how to use a washing machine cleaner. You will have to work carefully, because Tiret powder is an aggressive chemical, for the use of which it is recommended to wear protective gloves
This precaution will protect your skin from irritation caused by the chemical components included in the powder.
Instructions on how to use Tiret powder are as follows:
- all things are removed from the drum of the automatic machine;
- a small amount of cleaning powder is poured onto a rag;
- First, the tray for dry powders and conditioners is treated, a place near the dispenser;
- The machine drum and the rubber seal of the hatch are wiped.
All machine elements accessible for such cleaning should be treated with Tiret. This product will perfectly cope with any contamination and clean the glass of the loading hatch until it shines.
After this procedure, about two hundred grams of Tiret diluted with water is poured into the powder receiver, any mode for washing things is activated, during which the liquid is heated to sixty degrees. The spin function is not used during this procedure. It is recommended to use the extra rinse option to completely rinse out the Tiret cleaning powder. Once the cleaning process is completed, the unpleasant odor will disappear from the machine.
Preventive actions
To maximize the life of your automatic machine, it is recommended to regularly protect it from mold, dirt and mildew. For this purpose, the following activities are carried out:
- when the washing process is completed, the rubber cuff is thoroughly wiped with a dry cloth, the loading hatch door is left open so that the internal parts of the machine dry well;
- the powder tray is regularly washed under running warm water;
- To remove scale, anti-scale agent (Tiret powder) is used, which is put into the machine at least once every six months;
- periodically the machine is started with a disinfectant. For this purpose, bleach containing one glass of chlorine is mixed with a couple of glasses of detergent or detergent, everything is poured into the drum of the machine, and a program is activated in which the water is heated to ninety degrees.
Variety of anti-clog products
When you go to the store to look for a good solution for blockages in pipes, you can see a large assortment of these products. Some of them are more expensive, others are very cheap. But in this case, expensive products may not be the best. Among the products offered to consumers, there are budget options that can perfectly cope with removing blockages that have formed in the sewer pipeline.
The main purpose of all chemical compounds for drain cleaning is prevention. The plumber recommends treating drains with your favorite product at least once every month. As a result, the sewer system will function without problems.
Also, treatment with drugs should be carried out when a deterioration in the waste water flow is detected. If it starts to go away slowly, you need to fill it up or fill it with product. The problem will disappear and then there will be no need to contact a specialist.
Quite often, anti-clog compounds in pipes help remove severe contamination, but not in all cases. The reason for such a poor effect from using the product is not always its low quality, but the fact that it is not able to dissolve the cork.
For example, during repairs, rags, small pieces of construction debris, etc. fell into the sewer. All this can be removed from the pipeline, but only mechanically, and even in this way it will be difficult to do. Such contamination is removed using special devices, for example, a plumbing cable.
Precautions when using Tiret Turbo
The use of Tiret for cleaning pipes is allowed only for plastic, cast iron and steel pipelines. The product is contraindicated for copper lines. The components have a negative effect on rubber. This can affect the gaskets and seals of the sewer system. After several cycles of cleaning Tiret for pipes, the condition of these components is checked and, if necessary, replacement is made. The advantage of Tiret for plastic pipes is that it does not have a destructive effect on polymer compounds.
Security measures, methods of protection:
- Use only with rubber gloves. This will eliminate the possibility of the gel coming into contact with open areas of the skin.
- If the product gets on your skin, wash with hot water and soap or a disinfectant. This neutralizes the effect of anionic surfactants.
- If the gel gets into the eye area, rinse immediately with cold water and consult a doctor.
- Cleaning agent in food. Do a gastric lavage. This can be done with a weak solution of potassium permanganate or kitchen salt. Immediate consultation and examination with a doctor is required.
It is prohibited to use Tiret Turbo for pipes together with bleach. During interaction, hazardous vapors are released.
During the decomposition reaction of biological debris, vapors are formed. They have an unpleasant odor, but their composition does not contain a concentration of harmful substances dangerous to humans. But after pouring Tiret into pipes or a siphon, it is not recommended to be above the drain hole. The room does not need to be ventilated, with the exception of an unpleasant smell from the sewer causing discomfort.
What is Tiret Turbo?
Tiret Turbo for pipes is a gel that allows you to quickly get rid of blockages and unpleasant odors.
Tiret Turbo will not only help get rid of the blockage, but will also eliminate the cause of the unpleasant odor from the pipe.
The concentration of the product differs depending on the composition. The line includes the following products:
- Turbo is a gel designed to remove complex blockages.
- Professional - used for cleaning light blockages, as a preventive measure.
- Antibacterial - the difference lies in the increased concentration of chlorine, the product is used to get rid of blockages and unpleasant odors.
A separate category includes a cleaner for turbo washing machines.
Precautionary measures
Although Tiret Turbo is considered a harmless product compared to other household chemicals, safety precautions must be observed when using it.
Need to:
- Use rubber gloves.
- Protect your eyes, wear safety glasses.
- Turn on ventilation in the room where the gel is used, and open windows and doors.
- Do not lean low over the sink or inhale gases released during a chemical reaction.
- When pouring the gel into the hole, keep it at arm's length.
- Do not use Tiret Turbo simultaneously with bleaches.
- Rinse off the product with water in a thin stream to avoid splashing.
- Keep out of the reach of children.
Methods for clearing blockages
According to numerous customer reviews, Tiret-turbo gel for removing blockages is recognized as the most effective pipe cleaner.
Why? Yes, because it not only removes blockages quickly and effectively, breaking down fat, any dirt, oil and wax, but also perfectly disinfects, eliminates unpleasant odors and prevents the formation of mold. Its additional advantage over other products is that it softens water.
Today there are two ways to get rid of an unnecessary plug in a pipe, these are:
- Mechanical.
- Chemical.
Mechanical method. Pipe cleaning is done using a vantose or a metal cable. Vantose will be effective for simple blockages. If its use does not bring any results, you need to use metal wire, which is sold at any nearby hardware store.
The diameter of this cable does not exceed eight millimeters. Before starting the procedure, it is necessary to disassemble the siphon
Then carefully insert the cable into the pipe until it reaches the mud plug. When the wire hits an obstacle that interferes with the movement of waste, it must be turned slowly
This must be done clockwise.
In this case, it is necessary to pour hot water into the pipe, which must be prepared in advance. Hot water will help dissolve the clump of dirt and move it further. If the cork is too dense, it is recommended to punch it with light blows.
Chemical method
The above method can be easily done by any man. But what to do if not every woman has such a luxury as a husband. Of course, use chemical pipe cleaners. After all, the chemical method of getting rid of blockages in pipes does not require disassembling the siphon.
You will find a huge amount of products on the shelves in the supermarket. But we must choose the remedy that is primarily safe for our health. And of course, I wanted it to be effective. Below we will discuss the pros and cons of such a product as Tiret-Turbo. Let's look at the instructions for its use and read several reviews from housewives.
Tiret-turbo is available in the form of a thick gel. This allows it to flow slowly down the pipe walls and do its job more efficiently. Also, this product can easily deal with clogs even when there is water in the sink. Agree, not many products can boast of such an ability. In addition to these advantages of Tiret-Turbo, consumers also noted the following:
- has antibacterial properties;
- eliminates unpleasant odors;
- when used correctly, does not harm human health;
- has a child-resistant lid;
- prevents the formation of mold.
Rate this article:
How to use Tiret washing machine cleaner?
Washing machine cleaner “Tiret” thoroughly cleans your washing machine. 1) Eliminates limescale and scale. 2) Removes soap scum. 3) Provides hygienic cleanliness. 4) Eliminates unpleasant odor. 5) Protects the washing machine. For best results, follow these instructions: 1. Make sure there is no laundry inside the washing machine. 2. Unscrew the cover. 3. Add a small amount of product to the sponge and wipe the detergent and rinse aid compartments. 4. Pour the remaining liquid into the detergent compartment. 5. Start the temperature mode at 60 °C. For best results, it is recommended to run 2 empty cycles per year at 60°C, using 1 bottle each time. Precautions: Keep out of the reach of children and away from food and drinks. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately with plenty of water and consult a doctor. Wash your hands after use. For sensitive skin, use protective gloves. Do not swallow. If accidentally swallowed, drink plenty of water and consult a doctor immediately, showing the container. Ingredients: 15% or more, but less than 30% citric acid, less than 5% nonionic surfactants, fragrance. Safe for septic tanks.
250 ml., Poland.
Express descaling agent for washing machines and dishwashers, powder. 70 rub.
For washing machines, dishwashers, coffee makers, kettles, irons. 70 rub. Tiret, Cleaner for washing machines, limescale, scale, for washing machines, odor control
My favorite machine is the washing machine. A brilliant invention of mankind. We have had the automatic machine for many years. The first was the little Euronova, then they decided to change it to a more powerful Eurosoba model. Now LG (6kg beauty with drying).
Our water is hard. Therefore, the car has to be washed periodically (once every 2 months). I have a drain in my bathtub, so it’s easier to keep track of what and how it pours out of the machine.
In addition to adding Calgon with each wash, I wash the machine itself every 2 months with special products. Recently it has been Dr.Beckmann Cleaner for washing machines, hygienic 250g or Dr.Beckmann Cleaner for washing machines with corrosion protection 250ml.
But sometimes I try something new. Perhaps it will be better. Standard bottle 250 ml.
The liquid inside is blue. Doesn't smell much.
This bottle is enough for 1 time.
We wipe the “bulging” parts of the machine - the hatch window from the inside, the powder compartment, and pour the rest into the washing powder compartment. My car has a special one. cleaning program.
I fill the product and start it up. All this lasts – 1 hour 20 minutes.
It is indicated on the packaging.
run the cycle at 60* (often written without soaking). I liked that there wasn't a lot of foam. One Japanese product produced a lot of foam, so it came out of all the cracks) After use, the car is clean, there are no unpleasant odors.
After each wash, I dry the machine with a paper towel (collect excess moisture) and open the powder compartment. Periodically I drain the water and clean the filter of debris. Therefore, I can’t show what was/was, it’s generally clean) But the smell sometimes appears - Not a bad article about the smell in the washing machine. Interesting ingredients:
Citric acid + surfactants + flavoring.
I tried, as advised, to clean only with citric acid. I did not like. It cleans well from scale, but does not remove the smell.
Here it was cleaned and the smell was removed. I am pleased with the result and plan to buy this product. The price is clearly better than my usual product.
That's all) I recommend
Hello my friends! Today I want to talk about such a wonderful and very necessary thing as a Tiret washing machine cleaner.
I bought it yesterday at the well-known Magnit store for 193 rubles. We purchased the car quite recently, in January of this year, by the way, here’s a review about it, about my favorite, assistant and beauty
