Everything about organizing the production of PVC pipes in Russia: technology and profitability + TOP-6 leading companies

Modern construction technologies require fast pace of work and versatility of materials.

This applies to fundamental construction, finishing and communications.

At all stages it is impossible to do without plastics. Water and electricity are supplied through a plastic pipe, and heating in apartments is laid through it.

It is impossible to list all aspects of the use of gray polymer pipes. They are versatile, affordable and technologically advanced. It is noteworthy that even plastic waste, which is thrown out in tons every day, can be used to make pipes.

The possibility of giving a second life to used polymers will be discussed in this article.

Why PVC pipes?

As experienced plumbers joke, with the advent of PVC pipes, the era of male plumbers ends. Now any housewife can install a pipeline in the kitchen. And indeed it is. To work with this material, you do not need special soldering irons, as is the case with polyethylene pipes (PE). A welding machine and heavy tools are replaced by a tube of glue and a lightweight hacksaw for cutting plastic.

The small specific gravity of the products allows you to work without much physical effort. All you need is accuracy and precision. And all this simplicity was achieved without loss of quality. On the contrary, according to some characteristics, PVC pipes are even better than metal and other analogues.

Polyethylene pipes from the manufacturer.

Since our company independently produces HDPE polyethylene pipes, we are able to offer very attractive prices for the entire range of products. PE plastic pipes are sold both retail and wholesale. For regular customers and large wholesalers, we provide even lower prices, individual terms of cooperation and delivery. Selling polyethylene pipes from the manufacturer allows you to significantly save on cost. As a result, you get a competitive advantage in the construction of communications, be it laying electrical wiring or creating a sewer system.

At your request, polyethylene sewer pipes for small diameter cables are supplied in coils of various lengths. Large diameter polyethylene pipes 90-160 mm are sold in lengths up to 12 meters. Payment is made in cash or by bank transfer. In case of long-term cooperation or production of a large batch, it is possible to conclude a contract and be accompanied by the necessary package of documents. For your convenience, pipes are delivered throughout Moscow, the region and to the regions of Russia. The supply of HDPE polyethylene pipes to the regions is carried out only through trusted transport companies.

You can contact us by contact numbers or send an email with a question or commercial offer. Our specialists will advise you on the availability of goods in the warehouse and help you choose the desired diameter and length of pipes. If there are currently discounts or promotions, you will also find out about this.

Main characteristics of polyvinyl chloride pipes

There are many types of PVC pipes. They are classified according to various criteria. To understand for what purposes the sample is intended and what qualities it has, you must first familiarize yourself with the labeling. The alphanumeric code contains:

• GOST to which the product corresponds.
• PVC material type.
• Purpose of the product.
• Bell type.
• Wall thickness.
• Outside diameter.

According to the characteristics of the working environment, PVC pipes can be pressure, non-pressure and for work in rarefied environments. Non-pressure ones are designed for operating pressures less than 1 bar. Pressure types are designed for transporting media with a working pressure of more than 1 bar. They differ according to several criteria, such as strength:

• Lungs (marked with the letter L).
• Middle (marked N).
• Heavy (marked S).

This characteristic is taken into account when calculating the underground installation of polyvinyl chloride pipelines. The deeper the pipeline needs to be laid, the higher the strength of the materials must be.

Polyvinyl chloride is a dielectric, and this has the added benefit of avoiding the destructive effects of stray currents that plague their metal counterparts. Due to these properties, PVC pipes are used in dielectric cable systems (DCS).

PVC pipes are distinguished by high ring rigidity; this characteristic makes it possible to seal at pressures of up to 120 bar. The product is inert to the chemical composition of the working environment and is resistant to ultraviolet radiation.

The low roughness of the inner surface ensures that the product does not silt, dirt does not collect on the walls, and the internal cross-section does not decrease because of this. Sediment not only negatively affects the quality of the transported liquid, but also increases energy costs for pumping, so the smoothness of the walls from the inside is a significant advantage.

Products and their markings

What to look for during the selection process? To avoid mistakes, you need to understand the variety of assortments of both domestic and foreign production. All produced polypropylene products have their own marking:

What color products are there?

Available in four colors:

• black;
• green;
• white;
• gray.

White and gray products are used to create utility lines. However, white products are not suitable for outdoor plumbing. They are intended exclusively for internal use, since at zero temperature they begin to crystallize. Can withstand a maximum pressure of 25 bar.

Gray products are more practical. Their advantages include:

1. Environmental cleanliness.
2. Long service life.
3. Chemical and thermal stability.
4. Use in pressure systems.
5. High level of tightness.
6. To make the connection you need a regular soldering iron.

Black products are more suitable for sewerage. In their production, special additives are used to improve technical capabilities. They are not afraid of aggressive environments and ultraviolet radiation. The strength indicator is impressive, as is the service life. An irreplaceable thing for watering is green products. They are inexpensive, but durable and practical.

Areas of application, advantages and disadvantages of PVC pipes

PVC has a number of specific advantages. Thanks to them, it is advantageous to use a pipe made of this material for laying internal and external sewerage systems and drainage systems. Lines of electrical cables, Internet and telephone lines are placed in a shell made of PVC pipes.

Due to their resistance to corrosion, PVC pipes are also used as casing pipes to strengthen the walls of wells. For water supply pipelines operating under pressure, models made of unplasticized polyvinyl chloride (UPVC) are used.

The advantages of using PVC in pipelines include:

• Easy to install.
• A light weight.
• Environmentally friendly.
• Low roughness.
• Inert to chemicals.
• Corrosion resistance.
• Dielectric properties.

There are also disadvantages. For example, PVC pipes react very sensitively to increased temperature loads. The maximum recommended temperature of the working environment should not exceed +65 °C. As the temperature decreases, the material becomes non-plastic. Minor mechanical damage greatly affects the strength of products.

Kinds

Which variety is best to buy depends on many factors, including the scope of application. But first it’s worth finding out what products are produced. Popular models are available without reinforcement and reinforced. The last option is divided into the following groups:

1. Fiberglass reinforced. They are characterized by high rigidity and low thermal expansion.
2. Reinforced with aluminum foil (perforated or solid). In production, a static polypropylene copolymer is used. They come in gray color. Quite durable. They have automatic stabilization.
3. Reinforced with basalt fiber. The reinforcing layer is basalt. A distinctive feature is heat resistance and resistance to pressure changes.

You can find both smooth and corrugated designs on the market. Corrugated products with large diameters are used for sewerage equipment, drainage systems, drainage of rainwater and groundwater. The maximum operating temperature is 60 degrees Celsius. It will briefly reach 100 degrees. No special equipment is used to install the systems. The main advantages of the designs are considered to be:

• significant throughput;
• increased ring rigidity;
• resistance to corrosion and chemical components;
• opposition to the influence of stray currents;
• high hydroabrasive wear;
• long service life.

Profitability of plastic pipe production

To understand how profitable this production is, I want to offer you a simple example. Let's calculate the economic feasibility of producing the most popular and in-demand sample. This is a PVC sewer pipe with a diameter of 50 mm and a wall thickness of 1.8 mm. One meter of this pipe weighs 0.6 kg. Its cost on the market or in stores is approximately 57 rubles per 1 meter.

To produce 1 linear meter, you need approximately 0.6 kg of raw materials (PVC resin SG-5 made in China) costing 45 rubles per kilogram.

1 meter of pipe = 0.6 kg of raw materials * 45 rubles = 27 rubles - this is the rough estimate of the cost.

If the equipment is fully loaded, the production line can produce 95,000 linear meters of products per month. The production of such a volume will take about 34 tons of raw materials, which will amount to 1,500,000 rubles in monetary terms. Full implementation of the entire monthly production norm will bring 2,300,000 rubles in revenue.

By a simple mathematical operation, we get an obvious profit of 800,000 rubles. But additionally, you should take into account the costs of staff salaries, energy costs for production and other overhead costs. They are approximately equal to 35% of profits. We will receive net profit.

Net profit=800,000-35%=520,000 rubles/month

A line for the production of PVC pipes supplied on the basis of a franchise agreement (for example, let’s take the LPT 63 20×110 line) costs 1,750,000 rubles. The cost of its delivery, installation and setup will be about 150,000 rubles.

Investments and income

Taking into account the staff salaries for six months, the supply of raw materials and the cost of purchasing and creating production facilities, 5 million rubles of investment will be required to start the process. It is important to properly organize sales so that capacities are maximally loaded and downtime is reduced to a minimum. In this case, investments in production will pay off in 12-15 months, and it will begin to make a profit.

Prospects for the PVC pipe market in Russia

Now in the European Union, the leading position in market demand is occupied by PVC pipes. A strong lobby in state governments helps achieve this result. For example, in Austria, the share of polyvinyl chloride in the demand for polymer pipes is 58%. This fact was facilitated by government support for equipment manufacturers.

In the Russian Federation, this figure is inferior to the share of demand for traditional pipes and products made of polyolefins. It accounts for only 9% of the total pipe production. The physical properties of polyvinyl chloride and the climatic conditions in our country do not allow the maximum replacement of the need for pipes with products made from this material.

But it is quite obvious that PVC pipeline materials will still take their rightful place in the Russian market. They are very undervalued, and in some niches it is difficult for them to find an adequate replacement.

Manufacturers need to create their own lobby, following the example of Western countries, introduce regulatory documents, expand the scientific and production base. Major players in the polymer market are already working in this direction. Such companies, “Plastprofil” and others, consider this area of ​​business promising and invest huge amounts of money in technology and equipment.

A little about polypropylene

Polypropylene is the starting product of the polymerization of propylene and ethylene in specific quantities. The resulting material is called PPRC random copolymer.

In the domestic market today there is no worthy analogue to foreign polymers. For the production of polypropylene pipes, we use the Finnish RA 130E BOREALIS and the Hungarian TIPPLEN CS4-8000 TVK.

The essence of the pipe manufacturing process is simple, and it is not very labor-intensive. Speaking about it, we need to highlight the following features:

• low energy costs during production;
• environmental friendliness;
• for the production, installation and use of one set of lines for the production of polypropylene pipes and fittings, you do not need a lot of space (this is approximately 100 m2);

A complete polypropylene pipe extrusion line is a complete cycle of extrusion, calibration, cooling, exhaust, etc.

Recruitment

To organize the production of PVC pipes, it is necessary to load the equipment to the maximum in order to increase profitability. Therefore, it is advisable to calculate labor costs and staff staff on the basis of two- or even three-shift work. The LPT line 63 20×110 considered in the example of calculating profitability can be serviced by a staff of two employees.

One of them should preferably have the knowledge and skills of an adjuster and have the appropriate approvals. Thus, if you count on two shifts, you need to hire four people.

To provide the workshop with orders, it is advisable to organize a sales and marketing department. Activation in this direction allows us to cover a larger market share and attract the attention of customers from other regions. Even one employee in such a department can provide the plant with orders and free up the manager’s time to resolve many issues.

Scheme for obtaining a certificate of conformity

Some types of PVC pipes are subject to mandatory certification. This process is regulated by more than 20 state standards. Those types of products that are not subject to mandatory certification undergo the procedure at the request of the company that opened production. This improves the company’s image and makes it possible to participate in serious tenders for the purchase of materials in the B2B sector.

First, an application is completed. Next, a complete package of documentation and a correctly completed application is submitted to the accredited certification body. This documentation includes:

• Statement.
• Extract from the company's statutory documents (TIN, OGRN, OKVED codes).
• Basic regulatory and technical documentation (GOST, TU).
• Detailed description of the product (material, article number, scope of application).
• Sometimes they require a certificate of the manufacturer’s personnel.

Each region has a state center for metrology and certification. Initially, it is better to contact them: they will provide you with the entire list of actions. Product samples undergo laboratory tests. Their results are assessed by experts, and a corresponding certificate is issued.

Raw material suppliers

As already noted, searching for suppliers is the main task of an entrepreneur even at the stage of preparation for business activity. That is, the best option would be to reflect the supply chains for your production at the stage of drawing up a business plan.

There are several reasons for initial planning and searching for suppliers:

— Firstly, this is related to the acquisition of equipment. Since the hardware installations required for the production of pipes are focused on different consumables, that is, raw materials.

— Secondly, you will immediately need to decide what types of pipes you will produce. These will be sewer pipes, or pipes intended for water supply. Or maybe you will choose other areas of application of your product for your future workshop. In any case, the production scheme will need to be reflected in the business project in advance.

There are few enterprises that specialize in the production of primary raw materials for polymer production, as well as those that process secondary raw materials in Russia, although the demand for their services is very high. (Organizing a business in the production of raw materials for PVC workshops is a separate topic).

Therefore, it is worth qualitatively assessing the market. Perhaps purchasing raw materials from foreign manufacturers is suitable for you. Or maybe for logistical reasons this will be impossible, despite the low price. The entrepreneur’s task is to analyze the market of suppliers, first the closest ones, and then from neighboring regions, determine the most favorable conditions for themselves, and become familiar with the conditions of the suppliers themselves. And then put everything into the financial diagram of the business plan. It will be better if you identify several supply options, because it is not advisable to constantly rely on only one supplier. There are a huge number of force majeure and other factors.

Necessary equipment

The main unit on the production line of polymer PVC pipes is an extruder. This is a unit with a vertically located gearbox and an electric motor. It has a plasticizer cylinder and a barrier screw. Equipped with a special cabinet for switching and automatic control.

The entire extrusion line is a sequence of operations in a process flow diagram. Mounted indoors, it has a length from 20 to 60 meters. The corresponding technological process is sequentially performed on each element.

To produce corrugated models, an additional mechanism is added to the technological chain - a corrugator. It is mounted next to the extruder head and is a mold divided in half with a channel for the flow of cooling liquid.

Mechanisms that make up a production machine

And so, the line for the full production cycle of PVC pipes consists of:

• Extruder.
• A special machine for cutting pipes.
• Bunkers for receiving raw materials.
• Calibration baths.
• Pulling device.
• Vacuum former.
• Storage tank for laying pipes.

Extrusion lines have different parameters. You can order machines for production lines to suit your conditions. Productivity depends on the diameter of the produced pipe. You may want to consider purchasing used equipment. The lowest price for such a production complex is about 500,000 rubles.

Selecting a room

There are no special requirements for choosing a room. The main thing is that the machine for the production of plastic pipes and other necessary equipment fit. Of course, do not forget about a special room for working personnel. The building must also have a bathroom and storage area. It is prohibited to build such factories in the city. It is necessary to organize convenient entry for trucks. Depending on the amount of equipment, the building area should be from 40 to 200 square meters.

What is used as raw material

To produce pipes in an extrusion line, synthetic granulated PVC resin is used as a raw material. It can be of several types according to the method of polymerization of polyvinyl chloride. Suspension PVC resin is used to load extrusion lines.

In Russia, this chemical synthesis product is produced by several enterprises: Plastkard CJSC (Volgograd); OJSC Sayanskkhimplast (Sayansk-1); as well as CJSC "Kaustik" (Sterlitamak).

There is a shortage of domestic raw materials on the market, so manufacturers often resort to purchasing Chinese resin. The products of Hungarian and Polish factories are of very good quality.

Some lines for the production of PVC pipes successfully use recycled materials, such as crushed window profiles. In this case, it is necessary to control the viscosity of the melt by adding plastic compounds or adjusting the temperature.

Auxiliary substances for the polymer mixture

To achieve the required qualities during the extrusion process, special additives are introduced into the raw materials. The additive formula is prepared by the manufacturers themselves. The following are the chemical additives:

• Various stabilizers that give stability to the shape of the product.
• Plasticizers to regulate the viscosity of the material.
• Catalysts for controlling the polymerization reaction.
• Dyes.

The recipe is selected individually for each line according to the process conditions. Therefore, to maintain a constant level of product quality, it is advisable to use raw materials and additives from the same manufacturer.

HDPE pipe plant.

Our HDPE pipe plant offers its products to buyers from all regions of Russia. The production process is based on an integrated approach, which is expressed in a clear, structural division of technological operations at each individual stage of processing secondary raw materials and pipe production. The sequential implementation of production stages allows us to systematize quality control and compliance with the required standards in the manufacture of technical products.

In order to improve quality indicators, the main production lines of the plant have undergone complete modernization. Modern equipment has significantly reduced the loss of energy resources and waste of consumables, which has a positive impact not only on the quality indicators of products, but also served as a factor in significantly reducing the final cost of products.

Production technology

After the raw material enters the hopper through a large cross-section funnel, the resin granules are mixed and melted. Next, the polymer mass enters the extruder, where under pressure it fills a mold in the form of a pipe with given geometric dimensions. Uniform supply of the melt and constant temperature conditions are ensured.

This produces plasticized blanks, which then go into a tank for a vacuum calibrator. A vacuum is created in it using a special pump. The plastic workpiece is pressed against the walls of the calibrator under the influence of vacuum. This ensures uniformity and accuracy of the specified geometric dimensions.

This is followed by cooling in special baths. The finished product is cut into pieces of a certain length using a guillotine or a circular saw and placed on a rack for further sale.

How is product quality controlled?

Factories are equipped with special laboratories to monitor the quality of their products. They are equipped with measuring equipment and test benches. Testing of PVC pipes is carried out no earlier than 16 hours after the end of the production process.

The following parameters are tested:

1. Geometric dimensions. The test sample is compared with the standard, and the wall thickness is measured using a special measuring device.
2. Impact resistance test. The samples are kept at a temperature of 0 ± 1 °C for at least an hour and then subjected to 25 shocks for 30 seconds.
3. Determination of thermal deformation of a product under the influence of compressed air. Samples are subjected to internal pressure testing at a temperature of 95 °C for 165 hours or until failure is detected.
4. Measuring the elongation of a pipe after heating it. Marks are applied to the outer surface of the heated sample. It is exposed to heat for 40 minutes at a temperature of 150 °C, then the distance between the marks is recorded and compared with the original data.

As samples, we take 200 mm sections of PVC pipe, the ends of which are cut exactly perpendicular to the location of the axis of the product. On the eve of the tests, they must be in normal conditions at an air temperature of 25 ° C for two hours.

How to choose

Everyone's selection criteria are different. Some are interested in the question of what it costs, others study the functionality, others choose the best options, and others check the wall thickness. Everyone is right in their own way. However, experts recommend paying attention to the following indicators:

1. Diameter. Much depends on the scope of application. For internal apartment water supply, a sufficient diameter of 20 - 25 mm. Suitable diameters for risers are from 32 to 40 mm.
2. Maximum permissible pressure. All polypropylene structures, except PN10, are suitable for domestic use. They are produced with thin walls, but withstand significant pressure (10 atm.). They won't serve for long. Trunk pipelines are installed from thicker elements.
3. Thermal expansion coefficient. Depends on the choice of installation method. Thus, PN 20 models are not laid using the open method. It can bend and lose its original characteristics, as well as spoil the appearance of the object. The open method is provided for laying polypropylene structures reinforced with aluminum or fiberglass.
4. The maximum permissible temperature reading. The type of coolant that is to be transported inside the pipeline plays a big role. Products PN 16 are suitable for cold water supply systems, PN 25 - for heating systems, PN 20 - for hot water supply.
5. Strength. The indicator is high, but if the products are strongly compressed or when bent, cracks may occur. This must be taken into account during the installation process.
6. Heat resistance. It is assumed that the ambient temperature is not expected to be too low. The optimal option is +15 degrees Celsius, although it will withstand temperatures of 171 degrees, only for a short time.
7. Density. The indicator is 0.91 kg/cc. Polypropylene is wear-resistant and hard, and will withstand interaction with abrasive particles.
8. Persistence. Not afraid of unfavorable environments. It can become unusable only after prolonged “communication” with a strong acid or high temperatures. Salts and impurities cannot harm the product.

Which company is better to purchase products depends on personal preferences. Advice is inappropriate here. Where can I buy? According to buyers, it is best to visit branded stores. There is more choice, and you can chat with a professional manager who will not only introduce you to new products, but also help you make the right choice. You can order products online in an online store, having previously read user reviews, reviewed the product offered, and made sure of the integrity of the supplier.

Transportation and storage rules

When transporting and storing PVC pipes, certain rules must be followed:

1. They should not be exposed to large temperature changes and condensation. Storage within -30…+50 °C is acceptable.
2. Due to the negative effects of ultraviolet rays, it is undesirable to store without packaging in places not protected from exposure to the sun.
3. It is mandatory to have safety plugs at the ends of the pipes.
4. It is necessary to transport PVC products in strict accordance with the instructions for transporting such goods. If there is no factory packaging, it is necessary to place wooden spacers up to one meter.
5. Contact of product surfaces with metal objects is unacceptable; this can significantly reduce their wear resistance due to possible minor damage.

Russian production leaders

Large players are already standing out in the developing Russian market for the production of polymer pipes. A serious approach to business and a capacious market have allowed some manufacturers to achieve impressive results. Their products are products that meet the quality level of European countries. Below I will introduce some of the leaders.

Kazanorgsintez

Record holder of the Russian chemical industry. Produces 41% of all domestic polyethylene. Main products: bisphenol A, polyethylene, polycarbonate and polyethylene pipes. The total territory of the plant is 4.3 square kilometers, 8,617 people work there. The quality of the products meets high standards and allows them to be exported. This is the only polycarbonate manufacturer in Russia.

"Polyplastic"

registered in 1991. Now it is already a group of companies, it is the largest manufacturer of polymer pipes in the CIS. The total production capacity of all 15 factories included in the industrial group is 300 thousand tons of products per year. The total number of employees at the enterprises is more than 5,000 people. Products are exported to other countries.

"Eurotrubplast"

A holding company that is part of the Polyplastic industrial group.

"Techstroypolymer"

This enterprise is located in the city of Podolsk, Moscow region. The main product is 3 HDPE pipes made of polyethylene of the highest quality. The plant's technological line allows the production of pipes for gas and water pipelines with a diameter of up to 1200 mm.

"Baltenergosystems"

The manufacturing company, located in the North-West region, has ten years of experience in the production of plastic pipes. The range also includes fittings, polyethylene film and fire retardant film. Quality control in the company is organized at all stages of production. A completely closed cycle is organized here, using our own raw materials.

Trading house "Poliplast"

The enterprise is a sales center for the products of VRPolymer LLC. Its production is concentrated in the Kaluga region. The main product range of the company is high and low pressure polyethylene pipes, as well as connecting parts for pipelines. The company has been operating since 2003. Products are produced on six extrusion lines. The production of pipes with diameters from 16 to 225 mm has been established. The high quality of products complies with GOST 18599-2001.

This concludes my review of the most interesting niche of Russian business. The market volumes are so huge that there is enough work not only for large companies. The prospects for the sector lie in the fact that Soviet-built housing stock in Russia is very worn out. In many areas, utility lines need to replace old metal pipelines.

Probably, some readers have long been looking for an interesting business to invest their energy and savings in. I would be very glad if the information in the article turns out to be useful and encourages you to realize your potential in this particular area of ​​production. Subscribe to my reviews: many more interesting things await you.

(
1 ratings, average: 5.00 out of 5)

Products from foreign manufacturers

Banninger

The company is registered and located in Germany. Representative offices have been opened all over the world, including in our country. Distinctive features of manufactured products: high quality, reliability, safety, wear resistance, long service life. In the manufacture of goods, heat-stabilized polypropylene PP-RCT is used. The manufacturer has launched the production of elements with particularly large diameters. The internal nominal passage ranges from 20 to 125 mm. Products with a diameter of 90 to 125 mm are often used for installing vertical risers in multi-storey residential buildings. To supply process water to enterprises, structures with a diameter of 160 to 400 mm are used.

Purchase price – from 70 rubles.

Banninger polymer pipes

Advantages:

• service life reaches half a century;
• availability of ISO 9001:2008 certificate;
• do not change the chemical composition of the liquid;
• preserve the taste of drinking water;
• are not afraid of alkaline and acidic environments.

Flaws:

• if you order a large batch of goods (up to 330,000 rubles) you will have to wait for some time;
• to install elements with a diameter of 100 - 400 mm, you need to purchase a special soldering iron;
• the fitting is expensive.

Wefatherm

This German company deserves special attention. It produces structures reinforced with aluminum foil or fiberglass. Products are purchased for installation of heating systems, hot water supply, supply of drinking water and for technical needs. Withstands significant pressure. Shut-off valves with transitions to flanges or threads for installing a heated towel rail are also available. Craftsmen have a high opinion of their products. The internal walls of the elements are perfectly smooth, which prevents the formation of plaque, which leads to a decrease in throughput. Linear expansion is minimal. Installation is easy and simple. No special equipment is needed.

The average cost is 150 rubles.

Wefatherm polymer pipes

Advantages:

• versatility;
• functionality;
• strength;
• practicality;
• reliability;
• environmental friendliness;
• no deposits are formed inside;
• The joints are connected without stripping.

Flaws:

• the price is high;
• If you overheat the soldering iron, the joint may become deformed.

Akwatherm

The company has been present on the goods market for more than four decades. Has proven itself on the positive side. Produces exclusively high-quality products. The list includes designs for hot and cold water supply, heating systems and heated floors. Elements are purchased for installation in hotels and high-rise buildings. The product undergoes full testing in our own laboratories. It is distinguished by flexibility, strength, resistance to high pressure, and environmental friendliness. The latest technologies and high-quality equipment are used in production. The structure can be buried underground or carried out in open space. In this case, no additional protection is required.

Purchase price – from 50 rubles.

Akwatherm polymer pipes

Advantages:

• products are extremely popular;
• positive reviews from professionals;
• acceptable price;
• safety;
• reliability;
• long service life;
• installation speed;
• Available in poles and coils.

Flaws:

• not always on sale;
• Some types are only available to order.

Wavin Ekoplastic

The company is the product of a merger of a Czech company and an international corporation. Products are sold in 25 countries. It is extremely popular among domestic craftsmen. Available in skeins and racks. Working pressure – from 10 to 20 atmospheres. Internal diameter control at height. The products belong to a new generation. Reinforcement is carried out with basalt fiber, which allows it to withstand temperatures of 90 degrees. There is virtually no linear expansion. You can lay elements in close proximity to boilers, boilers or other heating devices.

You can purchase the product at a price of 70 rubles.

polymer pipes Wavin Ekoplastic

Advantages:

• light weight;
• different diameter;
• fittings fit the pipes;
• availability of a quality certificate;
• strength;
• reliability;
• safety;
• maintainability;
• wear resistance;
• value for money.

Flaws:

• You can find fakes on sale.

Tevo

The manufacturer belongs to the young category, but the products are very popular all over the world. In addition to polypropylene pipes, the production of manifolds, fasteners, fittings, and shut-off valves has been established. In the manufacture of goods, innovative technologies and high-quality equipment are used. The quality of the material used is excellent. The products are environmentally friendly, reliable, practical, and functional.

The average cost is from 75 rubles.

Tevo polymer pipes

Advantages:

• designs are tested in our own laboratories;
• constant quality control;
• seven-year warranty from the manufacturer;
• use of Borealis raw materials;
• presence of a combination fitting.

Flaws:

• Not available at all retail outlets.

Novaplast

The largest Turkish manufacturer supplies the market with high-quality products. It is extremely popular in more than 50 countries, including France, Germany, Spain, Italy, and Russia. Produced from Borealis granulated polypropylene or Basell raw materials. It is highly environmentally friendly and reliable. Used for installation of heating and water supply systems, including drinking water. The maximum cross-section of pipes is 4.5 mm. Can even be used for gas supply. Widely used in the construction of residential and commercial buildings.

Purchase price – from 130 rubles.

Novaplast polymer pipes

Advantages:

• constant thorough checks of product quality at all stages of production;
• can be placed in concrete structures;
• the internal walls are not affected by lime deposits;
• minimum service life - half a century;
• quality certificate;
• strength;
• practicality;
• ease of installation.

Flaws:

• The distribution network is not very developed.

Supratherm

The Romanian company has been supplying the market with high-quality polypropylene risers and connections for more than a decade. The products are certified by international agencies, there are no claims or complaints about them, they are completely reliable and safe. One of the directions of the enterprise is the production of stabilized pipes reinforced with aluminum foil for reinforcement. No pre-cleaning is required before soldering. Fittings with threaded connection. Mortgages from an Italian manufacturer are used. Puddles and leaks during operation are completely eliminated. Often used to connect heated towel rails, pumps and heating radiators.

Products are offered at a price of 65 rubles per meter.

polymer pipes Supratherm

Advantages:

• a huge number of certificates from international controllers;
• pipes are reinforced with fiberglass or aluminum;
• have both domestic and industrial purposes;
• wide choice of parameters;
• reliability;
• practicality;
• speed of installation;
• high quality.

Flaws:

• Some series are produced with a rough surface.

Pilsa

Another Turkish company that is actively filling the market with polypropylene products. The quality of the product is worthy of respect. Implemented in many countries around the world. It is extremely popular among craftsmen. In Russia you can find it in almost any specialized retail outlet. Withstands pressure of 20 atmospheres. Used for laying hot and cold water supply systems. The catalog contains several options: PPR-Al and PPR Fiberglass (reinforced with aluminum foil or fiber). Recently, the production of PPR Basalttherm pipes (using basalt fiber) has been launched. This model can be used to operate at temperatures up to 110 degrees. Linear extensions are completely absent. The product stands out among its peers with a thick red stripe on the side. Soldering is easy and quick. The soldering iron quickly softens the material, and the connection occurs quickly and without problems.

Sold from 87 rubles.

polymer pipes Pilsa

Advantages:

• resists acids and alkalis;
• withstands high pressure;
• value for money;
• positive reviews;
• safety;
• environmental cleanliness;
• durability;
• purchased for self-installation of systems;
• high quality material.

Flaws:

• There are interruptions in supplies to our country.

FV Plast

The well-known Czech company has been producing products for a quarter of a century. In the manufacture of structures, polypropylene of the third type or polypropylene - copolymers is used. In addition to pipes, the manufacturer offers high-quality fittings, shut-off valves, pipes, tees, elbows, valves and other necessary components of the system. Some models are used when installing heated floors. The throughput diameter varies from 16 to 110 mm. Working pressure indicators are from 16 to 20 atmospheres. The company has long mastered coextrusion technology, so the structures are used for installation in close proximity to boilers and boilers. The company also uses Stabioxy technology, creating an oxygen-protective circuit around the internal channel. This allows you to create an additional barrier for heat exchange, which helps reduce heat loss during transportation from the boiler to the radiator.

Retailers ask for products from 130 rubles.

polymer pipes FV Plast

Advantages:

• wide range of manufactured designs;
• maximum permissible temperature – 90 degrees Celsius;
• there is no need for cleaning before welding;
• reliability;
• long service life;
• installation speed;
• practicality;
• functionality;
• versatility;
• high quality of materials used;
• value for money.

Flaws:

• maximum internal diameter – 110 mm;
• Mainly has a domestic purpose.

Dizayn

The product from the Turkish manufacturer is very popular all over the world due to its durability, reliability and good price-quality ratio. The main purpose is the installation of water supply and heating systems. Independent experts have repeatedly confirmed the quality and environmental friendliness of the manufactured elements, which is confirmed by numerous international certificates. The company constantly introduces innovative technologies and controls the quality of products at every stage of production. Unique technologies make it possible to produce structures that have no analogues in the whole world. This applies to pipes with a diameter of 1600 mm. Large manifolds are able to withstand pressures of 12.5 bar. These products are used in industrial enterprises and large construction sites. It can be placed in tunnels and mines.

The product is sold at an average price of 135 rubles.

polymer pipes Dizayn

Advantages:

• reliability;
• quality;
• practicality;
• functionality;
• versatility;
• with corrosion protection function;
• affordable price;
• the level of linear thermal expansion is small;
• plastic and reinforced devices are produced;
• availability of international quality certificates.

Flaws:

• Some lines are produced in the Middle Kingdom, so the quality of an individual batch may be “lame”.

Blue Ocean

Despite their Chinese origin, the designs are distinguished by their quality, reliability and long service life. Three options are available: fiberglass reinforced, aluminum and conventional pipes. The products have color stripes indicating a certain temperature range of use. The color variety is impressive. On store shelves you can find elements of green, white, gray and blue. This helps to fit them into the existing interior of the room. They have increased flexibility, which is why they are very popular among builders. Ideally mounted in difficult areas (near the wall or ceiling). The pipes can be carefully removed from the surface and soldered.

The average price is 190 rubles.

Blue Ocean polymer pipes

Advantages:

• wide functionality;
• versatility;
• practicality;
• ease of use;
• environmentally friendly product;
• safety;
• various colors;
• reinforced with fiberglass or aluminum.

Flaws:

• the use of low-quality glue by the manufacturer leads to peeling of the foil;
• There is an unpleasant odor during the soldering process.